closeThis

News

Xingya baby swimming ring classification and instructions

2021-07-09

Dongguan Xingya Baby Swimming Ring

Xingya baby swimming ring is a swimming ring specially designed for children and babies，It is divided into different specifications such asS/M/L/XLmade of rubber, PVC and other materials, and has different shapes such as round and star.

1.Specification overview

S-3-4kg

M-4-6kg

L-6-8kg

XL-More than 8 kg

2.Dongguan Xingya BabyVariety classification

Classified by quality materials

(1) Plastic baby swimming ring

The baby swimming ring is made of plastic. The baby swimming ring made of this material is basically a single airbag. The design is basically the same as that of an adult swimming ring. The advantages are simple, easy to process, and relatively cheap.

(2) PVC baby swimming ring

PVC is a new type of material. Compared with plastic, PVC material has certain advantages. It has good gloss, good hand feeling, good comfort, firmness, and is not easy to leak. In addition, PVC material baby swimming rings basically use double airbags. , The design of four airbags basically has no safety hazards.

Classified by the number of airbags

（1）Single balloon baby swimming ring

Single airbag baby swimming ring, there is no air nozzle on the swimming ring, and no pump is required to inflate. It is done directly during processing and the softness is not easy to adjust. For babies who require different softness, it is not very easy to achieve Maximum comfort for baby swimming.

（2）Double balloon baby swimming ring

The double airbag baby swimming ring is designed with double airbags and double buttons to realize double insurance. Most baby swimming rings are basically double airbag baby swimming rings. Each airbag has an air nozzle, which can adjust the comfort required by each baby according to the amount of inflation, and has a buckle, which is suitable for putting in the baby. , Attach the buttons so that if one of the airbags leaks, the baby can also be buckled, and the other airbag has enough buoyancy to hold the baby on the water, and get enough time to pull the baby out of the water, eliminating safety hazards.

（3）Four-balloon baby swimming ring

The four-airbag baby swimming ring divides the entire double-airbag baby swimming ring into two halves. It is designed from the perspective of baby safety, that is, three of the airbags leak at the same time, and the operator has enough time to pull the baby out of the water. At the same time, the probability of three airbags leaking is very, very small, so the four-airbag baby swimming ring is completely based on the baby’s safety, but it may also omit two points. Airbags are inflated, and special attention should be paid when inflating. The amount of inflation on both sides should be basically the same. The purpose is to balance the baby when swimming. It is still more difficult to achieve such an inflation effect. Second, there are more airbags, as long as there are more airbags. If one air bag is broken, the entire circle will be scrapped, which increases the possibility that the baby's swimming circle will be broken.

3.Classification of parts

（1）Neck ring

During the time when the baby cannot raise his head, use a swimming ring worn around the baby's neck. The height of the baby swimming pool is basically designed according to the height of the baby's neck.

（2）Underarm circle

The baby grows up day by day and likes to swim every day. In order to continue the baby swimming project, the baby’s head can also be raised at that time, and he no longer likes to be trapped by his neck. The baby also has a wider field of vision, and at the same time The depth of the baby swimming pool cannot reach the purpose of baby swimming (the baby’s feet touch the bottom of the pool). If you want to swim in the original baby swimming pool, you must increase the baby’s swimming height or increase the depth of the pool, and put the circle from the neck Move to the armpit, increase the baby's swimming height, in order to solve these two problems, so the armpit circle is produced.

4.Shape classification

（1）Round baby swimming ring

The round baby swimming ring is the most essential baby swimming ring, and it is also the patent of many baby swimming rings. The shape is round and the surrounding balance is good, which is conducive to the free swimming and fitness of the baby.

（2）Star baby swim ring

The star-shaped baby swimming ring is designed and manufactured on the basis of the original round baby swimming ring. The advantage is that there are several arc designs, which show the grade of the swimming ring, which is more beautiful. The disadvantage is that a star shape is dug out from the circular place. , Reducing the amount of inflation of the baby swimming ring, reducing the buoyancy, the ring sinks more on the water surface, and the resistance on the water surface becomes larger, which is not conducive to the free swimming of the baby and increases the difficulty of the baby's swimming.

5.Precautions

Inflation instructions: First, use an inflator to inflate one side of the airbag to 60%, then inflate the other side, and finally achieve 90% inflation. The amount of aeration should not be small, the less buoyancy is not enough, and the more is easy to blast, resulting in unsafe factors, the hand feels comfortable after inflation, moderate is appropriate.
Air nozzle description: After the air pump is inflated with the air nozzle, unplug the air pump. At this time, the air nozzle will automatically close. Even if the air nozzle cap is not covered, the air will not leak. This is considered qualified. Then plug the gas nozzle cap tightly for further safety. Remember, the air nozzle cap must be tightly plugged, and it cannot be assumed that the air nozzle is not leaking without closing the air nozzle cap, as this also has hidden dangers. After putting on the hat, be sure to press the air nozzle in the circle, otherwise it will scratch the baby's neck!

6.Instructions for use

1. After use, inflate and let it out overnight to check for leaks.
2. When wearing a collar for a young baby, tease the baby to raise his head first, so as not to put the baby's chin in the collar, causing the phenomenon of not being buckled.
3. Make sure that the buckle is in a fastened state from time to time during use.
4. Do not use an electric air pump to inflate, and avoid bursting the collar.
5. Put two hands down.
6. The handle is used to hold the baby when swimming.
7. The opening faces backwards.

The baby swimming ring has multiple independent airbags, and there is an anti-leakage device in the air nozzle, which is safe and reliable. The swimming ring is carefully designed, made and comfortable to wear according to the characteristics of the baby's neck. Proper use can extend the use time.

One、Inflated：First rush the reverse airbag (the reverse side without pictures and texts), pull out the air nozzle from its bag, open the air nozzle cover, insert the air nozzle and press against the swimming lap air nozzle, pinch it tightly with your thumb and index finger, and rush to the air 40%, and then flush the front airbag to make the air volume reach 50%, and the total air volume of the reverse front reaches 90% (initial inflation). Tighten the air nozzle cover with both hands, and then press the air nozzle into the air bag. The inflating should be done slowly, and the swimming ring should maintain 60% of the air volume when in use (use the fingers to pinch the inflated airbag with a force of about 1.5kg, and press down about one finger deep on the thumb surface.

Two、Adjustment：Level the airbags on both sides (adjust the air volume in the airbags to make the air volume consistent on both sides), make the inner circle round, adjust the buckle belt, buckle the buckle, pull both ends of the buckle from all sides, and check whether the buckle is Insert it tightly. Whether the airbags on both sides are tightly connected. If not, please shorten the adjustable side of the buckle.

Three、Deflation：First deflate the two airbags on the front, and then release the airbag on the back. When deflating, open the air nozzle cover, gently pull the air nozzle out of the air bag, pinch the root of the air nozzle or use an air needle to insert the air nozzle against the airbag. At the opening of the missing piece, gently press the airbag with your hand to slowly deflate.

Four、Precautions

1. Do not pull the buckle belt forcefully to avoid damage, the socket can not be disassembled casually, and the socket belt cannot be reversed to avoid falling off.
2. Do not insert gas needle objects into the leak-proof sheet to avoid damage to the leak-proof sheet or puncture the swimming ring.
3. When it is difficult to inflate, please pinch the root of the inflator mouth to open the leak-proof deviation and inflate at the same time.
4. The swimming ring should not be exposed to high temperature (fire or hot water) to avoid material degeneration. After use, wipe dry and store in a dry and cool place.
5. If equipped with a thermometer, the thermometer cannot be placed in hot water above 50 degrees, so as to avoid the temperature measuring tube does not fall, the apparent value is inaccurate or the thermometer breaks.

Five、Tips for safe swimming

1. It must be used for the first time. 2. After swimming, the newborn should quickly wipe off the water and keep warm.
3. When newborns, infants and young children swim, the whole process must be supervised by a special person.
4. The newborn swimming ring needs to be tested for safety before use (such as neonatal neck ring model, insurance buckle, air leakage, etc.)
5. The umbilical of newborns within days of birth must be affixed with waterproof umbilical protective stickers
6. After the newborn has put on the swimming ring, check whether the insurance buckle is inserted firmly
7. After swimming, remove the newborn waterproof umbilical protective tape, disinfect the umbilical cord, and wrap it with a disposable umbilical protective cord.
8. Baby neck ring adapts to the selection of swimming ring models: large, medium, and small

Under the guidance of doctors, nurses or experienced professionals, remember

The role and classification of Dongguan Xingya refrigerator magnets

October Hong Kong Gift Fair