Dongguan Xingya Industrial Company How to use the baby swimming ring

1. First check whether the infant's swimming ring air volume is suitable, whether there is air leakage and damage, and the buckle belt connection is good.

2. If the amount of air that has not been used for a long time is insufficient, it can be inflated with a pump, it should not be over-inflated, and the inflation is subject to a moderate soft and hard feeling, and the air nozzle is covered, and the air nozzle is pressed into the baby's swimming circle.

3. Appropriately open the baby's swimming ring, the opening can be put into the neck, put into the baby's neck (with warning words for the upper layer), and check that its neck circumference and the inner diameter of the baby's swimming ring are properly tightened, the baby's lower jaw is adjusted in place, and buckle the upper and lower layer straps.

4. Hold the baby, immerse it in the baby pool, and properly support the baby, check the buoyancy of the baby swimming ring, and gradually let go of the hand, adjust the baby's hand, and assist it to grasp the armrest at the bottom of the infant swimming ring.

5. After use, if you need to deflate and store, you can open the valve plug to squeeze the bottom of the air nozzle, and squeeze and deflate the baby swimming ring appropriately.

6. When using it again, take the pump to inflate, first fill the upper layer of the safety nozzle, should not inflate too much and then fill the bottom safety nozzle, inflation is subject to the appropriate soft and hard feeling, and then cover the air nozzle cover.

supplement

1. Take out the swimming rings and count the accessories

Dongguan Xingya Baby Swimming Circle includes 4 different numbers, namely: trumpet Jinwei; Medium neck circumference ; large neck circumference; Enlarge neck circumference.

Tips:

The choice of inner ring should be slightly larger than for baby.

2. Check the inflation of the swimming ring

The outer ring and inner ring are carefully inspected, and the air volume is 80%, which is firm and soft to ensure that there is no air leakage in the swimming ring. The outer ring of Dongguan Xingya baby swimming ring is a double airbag design, please fill the upper airbag and then inflate the lower airbag when inflating.

3. Inflatable

When inflating, first pull out the air nozzle, pinch it with your hand, then pump into the circle, let go after hitting it (if the air volume is too much, you can pinch the base of the air nozzle to deflate for air volume adjustment), buckle the air nozzle, and press the air nozzle into the swimming ring with your fingers.

Tips:

The inflatable of the swimming ring is about 80%.

4. Ferrule

Open the lap buckle, fold the buckle back on both sides with both hands, and pull the left and right sides of the lap back in opposite directions to make the opening larger. The ring is inserted from your baby's neck and positioned so that your baby's jaw is positioned in the jaw groove of the swimming ring, and then fastened the buckle. When ferring, two people operate together, one supports the back of the baby's head, and the other carries the loop, and the movement needs to be gentle.

5. Swim

When the baby with the swimming ring is slowly put into the water, help the baby grab the armrest at the bottom of the swimming ring when the baby swims, parents cannot use their hands to grasp the swimming ring to move the baby in the water, it is recommended to hold the baby's hand or support the baby's little butt to move in the water

Note the method:

1. Because it is a plastic product, please clean the ground before use, and if possible, pad a clean cloth on the ground to prevent the plastic from being pierced by sharp objects on the ground.

2. The first inflation of plastic products can be 8 minutes full, because the swimming pool is pumped into a vacuum state after the manufacturer's measurement and testing, due to the ductility of the plastic, its size cannot reach the data provided by the manufacturer for the first time. After the first inflation of plastic products, there will be some slack after 24 o'clock, please carry out a second refill.

Xingya Winter Friendly Tips:

1. Soak the neck ring at a water temperature of 30-40 degrees before use, and only after the plastic of the neck ring softens and the air inside adapts to the water temperature.

2. The neck ring should not be too full when inflated, because the indoor temperature is limited now, if it is too full, it is all cold air, once put into the hot water of the pool, the neck ring will burst at the interface due to the principle of overinflated thermal expansion and contraction.